HFE-7100是一种无色澄清，无色无味的液体物质，其中甲氧基-九氟代丁烷（C4F9OCH3）含量为99.5％，非挥发组分小于2.0pmm，专门用以替代氟利昂等“臭氧层破坏性”物质。该产品在新型的的氟氯化碳取代物产品家族中毒性最低，以8小时平均工作时间计，它的时间加权平均限制浓度750ppm。主要应用于精密电子仪器、医疗设备的清洗保清洗剂、溶剂，用于取代CFC-113、三氯乙烷、四氯化碳等。
●特点：无色、无味、不燃烧，ODP值为零；表面张力低、黏度小、蒸发潜热小。
●用途：特殊用途的溶剂、清洗剂、漂洗剂、无水流体、去焊剂和热传递介质，主要用于电子仪表和激光盘片的清洗，颗粒杂物的去除，光学系统及精密场合下清洗。
●优点：由于性能最接近CFCs，可使用原有清洗设备，不需要增加设备投资，也不需要对工艺做大的改变。
3m Novec fluid HFE-7100 is used in a diverse range of industries. Its convenient boiling point and excellent environmental, health and safety profile make it useful in applications like heat transfer, cleaning, lubricant deposition and more.
Carrier Solvents for Fingerprint Formulations
Used to replace CFCs, HFCs, HCFCs and flammable solvents in fingerprint formulations for ninhydrin or DFO, HFE-7100 works in the formula to provide optimally crisp ridge detail. HFE-7100s high wetting index assures maximum penetration and delivery of the ninhydrin or DFO to deposited amino acids, thus finding and developing more prints than other formulations. And HFE-7100 is compatible with a wide range of inks, papers and materials thus protecting the evidence from damage and blurred inks. Additional characteristics of HFE-7100 include low toxicity, zero ozone depletion potential, low global warming potential and the solvent is nonflammable.
Cleaning Fluids清洗剂
Its boiling point (61°C) and increased solvency make Novec fluid HFE-7100 an ideal cleaning solvent in applications like vapor degreasing, wet cleaning and FOUP cleaning. Low surface tension helps it to penetrate into tight spaces found in delicate electronic equipment - providing a thorough and complete clean.
HFE-7100 is non-ozone depleting, is not a volatile organic compound (VOC) and is approved without restrictions under the US EPA's Significant New Alternatives Program (SNAP).Depending on the type of soil to be cleaned, Novec fluid HFE-7100 can be used "neat" or in combination with other solvents. The product is compatible with most metals, plastics and elastomers.
Deposition Solvents润滑油稀释剂
Low viscosity and low surface tension provide this fluid with surface wetting and flow properties similar to 3M Performance Fluid PF-5060DL. In addition, Novec fluid HFE-7100 has a short atmospheric lifetime and low global warming potential (GWP). Novec fluid HFE-7100 delivers good solvency for PFPE lubricants and can dissolve high performance lubricant additives such as X-1P.
Heat Transfer Fluids热传导液
A wide liquid range (-135°C to 61°C) makes Novec fluid HFE-7100 well-suited to thermal management applications in a wide array of industries. In the semiconductor industry, it's ideal for automated test equipment (ATE) and wafer processing equipment requiring low temperatures.
Novec fluid HFE-7100 has a very low global warming potential (GWP) and offers reduced greenhouse gas emissions when compared to PFCs - without sacrificing performance.
|
今天是：
